Omega Engineering Corp. CL23A Calibrator Thermometer K-J-T Thermocouple

Description: This is a used piece of equipment in fine functioning condition. The sensor wire could be replaced it gave me accurate read outs when I put it in my arm pit and gave me a correct body temperature. And then dropped the sensor into the ice bin in my freezer and it immediately went down to the 17° temperature, see the last photo. Could use a new sensor, this one’s a little rough but it works. !!!!There is no transformer for power supply I just put a new 9 V battery in it.!!!! The OMEGA CL20 series calibrator/ thermometers simulate, measure and record RTD, ohm, thermocouple and thermistor signals–all in one meter. They outperform the competition in the lab and on the factory floor with 0.3°C (0.5°F) accuracy and in ambient temperatures from 18 to 28°C (64 to 82°F). This powerful handheld meter allows the user to calibrate in the field as well as in the lab and offers many additional functions that translate into cost effectiveness, increased productivity and long-lasting versatility and reliability. The 5-digit LCD display indicates all active functions and allows users to have 0.1° resolution in both Celsius and Fahrenheit. This convenient display takes the guesswork out of which sensor has been selected, displaying °C or °F and operating mode. Programming a CL20 series calibrator is a snap. The keypad allows direct entry of calibrator setpoints. Setpoints can also be entered from an outside source by inputting temperatures or voltages through the thermometer mode. There are no reprogramming hassles. The program won’t be lost when the meter is shut off. All values are retained and can be retrieved for fast repeat use. These calibrators feature 10 memory locations that can instantly recall any programmed value, and the step function lets the user run through the test points at the push of a button. This efficient feature saves time by allowing the user to simply enter the output value and calibrate. The ramp function of Models CL25 and CL27 makes calibrating switch and alarm setpoints quick and easy. By entering the upper limit, lower limit and step size, the meter automatically ramps between the limits. There is also a manual ramp function. No matter what thermocouple type is used, one of these meters can handle it. Features to choose from include 100 ohm and 1000 ohm RTD and 2252 ohm thermistor capabilities. Specifications Display: 5-digit LCD custom indicators for calibration type, units hold, recall, store, operating mode, bal, loaded memory locations (up to 10) Keypad: Momentary switches with tactile feedback, select power, thermocouple type, units, resolution, hold, store/recall, stop/clear, operating mode Configuration Retention: selected operating mode, thermocouple type, units, resolution and memory contents retained on power off Diagnostics: low battery, open input, invalid keypad entry, out of range, internal hardware fault Accuracy: see ordering matrix for details Ambient Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH Reading Rate: 1 per second Input Current: 50 nA typical(meter mode) Output Load: 100 ohms, min. (calibrator mode) Max. Common Mode Voltage: 42 V peak to earth ground Power: 9 Vdc battery, alkaline, included Battery Life: 16 hrs alkaline Dimensions: 178 H x 74 W x 28 mm D (7.0 x 2.9 x 1.1") Weight: 340 g (12 oz)

Price: 200 USD

Location: Tucson, Arizona

End Time: 2024-11-12T21:56:12.000Z

Shipping Cost: N/A USD