NEW Keyless Entry Key Fob Remote For a 2006 Lexus ES330 DIY Programming

Description: Item Specifics Compatible with: 2006 Lexus ES330 Bring your 2006 Lexus ES330 out of the dark ages and back into the modern era!NOTICE: Please check your current key fob blade to make sure it matches the picture above. The key blade is 1.5 inches. Your current key blade must match in length. If your key blade is longer than 1.5 inches you will require a different key blade. Key fob, car remote, clicker thingy, key bob… We've heard it called just about everything under the sun. No matter what you call it, one thing is certain: life is just a little bit sweeter when you can lock and unlock your car with the push of a button. Let's face it, it's the 21st Century and no one has time to fumble with caveman technology trying to stick a key into a lock to get into their car. Once you receive your new key fob simply program it to your vehicle and you'll be sliding in and out of your car with ease just like the rest of the cool kids. Programming Instructions 2006 Lexus ES330 (For remote portion only. Transponder Chip must be programmed by a professional) Obtain all remote transmitters for this vehicle. 1. Start with the key out of the ignition, driver’s door is open, all other doors and trunk closed and driver’s door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.3. Perform these steps within 40 seconds. A. Close, then open the driver’s door. B. Close, then open the driver’s door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 4. Perform these steps within 40 seconds. A. Close, then open the driver’s door. B. Close, then open the driver’s door. C. Insert the key into ignition and leave it in the ignition. D. Close the driver’s door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open driver’s door. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Price: 25.42 USD

Location: Omaha, Nebraska

End Time: 2025-02-14T17:56:24.000Z

Shipping Cost: 0 USD