MANTUA TYCO HO SCALE 0-4-0 0-4-0T NEW CAN MOTOR FLYWHEEL UPGRADE KIT

Description: PLEASE READ DESCRIPTION THOROUGHLY and LOOK AT ALL THE PHOTOSHi, this sale is for a new can motor flywheel upgrade kit for the early Mantua Tyco 0-4-0, or 0-4-0T steam locomotives. This kit will replace the Pittman or Mantua open frame motors found in the early small Mantua locomotives. This kit WILL NOT FIT later versions of locomotives that are equipped with Mantua's can motor Power Drive System. This motor kit will also fit in the Mantua 4-6-0 and 4-8-0 locomotives, modifications would be required, if you are interested in re-powering a 4-6-0 or 4-8-0, please contact me before buying this kit. If you need a motor kit for the Mantua 0-6-0, 0-6-0T, 2-6-2, 4-6-2, 4-6-4, 2-8-2, 2-8-4, or 2-6-6-2 steam locomotives, please see my other auctions. If you have any questions, please contact me before buying this kit. This may save you the hassle of having to return the kit. The motor measures 12mm wide x 16mm high x 27mm long, the flywheel measures 3/8 inch in diameter and it is 1/2 inch long, the flywheel shaft is 3/4 inch long and 3/32" in diameter. The motor draws 50ma with no load at 12VDC and develops 9550 rpm. The stall current is 1 amp, this motor is DCC compatible. This is a high torque motor; This motor will start turning smoothly on 1 volt DC and it is silent when operating at 12 volts. With this motor kit installed, your locomotive will have smoother starts, better slow speed operation, A LOWER TOP SPEED, and reduced operating noise. This motor kit utilizes the existing Mantua worm gear from the old motor. PLEASE NOTE! A worm gear IS NOT INCLUDED with the motor kit. If you have any questions, please contact me before buying this kit. The photo shows what the motor kit would look like when installed on an early Mantua 0-4-0 chassis. PLEASE NOTE! The chassis shown in the photo IS NOT INCLUDED with the motor kit. The motor kit consists of 1 can motor, 1 flywheel, flywheel shaft, motor mounting pad, hook up wire and illustrated installation instructions. The 2nd photo shows the contents of the motor kit. What you see in the 2nd photo is what you will receive. This is an unassembled kit. If you have any questions, please contact me before buying this kit This kit will be shipped via USPS Ground Advantage Mail. Note to international buyers! Ebay determines the charges for international shipping, not me. I have no control over what eBay charges for international shipping. Thanks for looking.

Price: 28.95 USD

Location: Prescott Valley, Arizona

End Time: 2024-10-01T23:24:07.000Z

Shipping Cost: 6.75 USD