Description: "24V S/R 0-10VDC 48""LDS 70INLB" Operate solenoid valve with 48"" lead wire. Available in 0-10V, 0-5V, 4-20mA, and S/R contact closure. Various configurations available including LP gas, diesel, steam, vacuum exhausts, hot oil heater & electric heaters. This 0-10VDC Control System for DDC Systems controls fans, dampers, valves and other devices that have field-variable speed controls. The included HART communication software enables monitoring of device status through the DDC Advanced programmable logic controller (PLC). A wide variety of OEM-qualified fieldbus communications options are available to optimize system design. System configuration can be easily accomplished using the FREE Control Builder software, supplied with every Control System. The M9208-GGA-3 monitor is a standard type 1 monitor, flange mount, with a 24 volt dc sealed 3 amp contactor. It has a 560 ohm resistor and a 4 wire connection. The Johnson Controls® 70"" Load Cell provides precise weighing measurement at a variety of capacities from 25 lb to 10,000 lb. This load cell is designed to comply with the SAE standard J1408 for cargo weight-inspection trucks. Bring your existing temperature sensors and thermocouples to the table and get your system up and running fast. With a completely redesigned operating platform, the M9208-GGA-3, with its sleek easy to read color LCD screen, provides easy access to critical loop information through four operator selectable menus - with simple keys that give you fast and accurate control. A new graphical icon design with multiple color selections will deliver a consistent look and feel across all data display pages with simplified diagnostic messaging for quick troubleshooting. M9208-GGA 48AC Remote Starter w/LED indicator, series kits are available for any application. The Series 70 modules are designed for high performance applications with high current load requirements. The 100% duty cycle allows users to have reliability you can count on. A control system that retains the long-term communication between battery charger and battery, monitoring battery activity and controlling solar power charge to extend battery life. This thermometer has been designed for applications which require a vertically mounted thermowell or a long wire leads. The sensor features a 4-20 mA output and a operating temperature of -40 to 257°F (-40 to 125°C) with an approximate accuracy of ±0.20% of reading,+0.25°F (±0.15°C). Our Mechanical Low-Pressure Combination Air Pressure Gauge/Lockout Safety Switch is a combination of a low pressure gauge and lockout switch. It has an adjustable, locking pressure regulator knob for setting the desired pressure set point. Pressures from 0 to 10 PSI can be selected, indicated with a gauge gauge range of 0 PSI to 100 PSI. The selection switch activates the corresponding indicator lights. The red light indicates that the lock out is closed and that regulated pressure is being applied to the system. The green light indicates that the lock out is open and that there is no regulated pressure being applied to the system Controls The M9208 control is an intrinsically safe, dual voltage, solid state contactor that combines the advantages of solid state electronics with well proven designs in magnetic contactor technology. The M9208 control incorporates the use of molded copper alloy terminal blocks for making electrical connections to the control. The HVAC Adapters and Thermostats category consists of over 98 percent of all products on the market today. However, most building owners buy generic, non-branded products.
Price: 333.91 USD
Location: Morton Grove, Illinois
End Time: 2025-01-26T07:51:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Johnson Controls
MPN: M9208-GGA-3
