High-Z S-400 CNC machine

Description: Germany made model High-Z-400. Pls. go to website cnc-step.com for the current similar model for details. This sale model is a previous model, except the control box is different, other mechanical hardware are the same. An ethernet smoothstepper motion card which shown on the 9th photo is included, it is housed in a small white plastic box that can be seen on the rest of photos, so laptop computer can be easily connected to the machine through the ethernet port, as well, if old type computer is adopted, parallel port can be used instead, then the card need not to be used. Pls. go to website warp9td.com for the cards' details.The machine is a properly used one. It is sold at half of the current retail price; bared machine is US2,558, with bundles included US3,906 . So, what's more here in the package are :>comes with Kress 1050-FME-1 spindle with one piece of M6 collet and a lock nut installed.>comes with T-slot plates supplied with some M6 T-nuts(all costs US200+ if purchased seperately from the original company), it will be supported on machine by aluminum brackets instead of thick aluminum bottom plate shown because the plate is too heavy for shipment. >comes with a mist nozzle, a diy lighting lamp and dust collector shoe.## Optional accessories (will be quoted and shipped separately):>A full licensed Mach3 software for installation to use.>extra pieces of collets and lock nuts that shown on 10th photo.>a diy set of dust bellow covers for the rails and leadscrews as shown on the 11~13th photo, they do not appear in original machine company as a sale item and they are diy made. They will be sold in unassembled state, but full installation instruction will be given. >a larger size diy control box enclosure parts and accessories for diy assembly in order to achieve upgrading purpose. These are shown in the 14~17th photo. Larger box size in width (depth and height are kept same) means that it can accomodate: a)one more axis drive for the 5th axis (original control box has the 4th axis drive) b)a switching power supply and a +5v power plug c)a white bigger box, inside of it contains two breakout boards. Also, the previous mentioned smoothstepper motion card is installed inside (beneath them), so 51 input and outputs provided by the card can be fully utilized d)5 additional connection sockets with lead wires for connectionsthe 14th photo shows the original control box on left while the parts are on right. 16th photo shows the control box were transformed to a larger one, the 17th photo is the final assembled box with cables connected to machine, two empty sockets are for the extra two axis motor connections. Comparison can be made with the original control box showed on the 1st photo. More cables are connected from toolchanging box to it for inputs and outputs signal transmission. Assembly instructions will be given, knowledge in electronic is preferred.>a diy electrical toolchanger box with power supply, showed on photo 18th and 19th. It has 5 tool pockets, it contains a electrical operated cover, tool height touch sensor. It comes with screen interface and program for Mach3 software envirnoment use. Extra collet and lock nuts shown to be purchase seperately as listed previously.

Price: 1600 USD

Location: kennedy town

End Time: 2025-01-29T09:17:10.000Z

Shipping Cost: 850 USD