Fujikura FSM-90S+ Core Alignment Fusion Splicer With CT-50 Cleaver

Description: eBay MENU SHOP ABOUT US FEEDBACKS SHOP ABOUT US FEEDBACKS *BRAND NEW* Fujikura FSM-90S+ Core Alignment Fusion Splicer With CT-50 Cleaver ITEM Features Cleaver tracking and upkeep with wireless communication Improved real-time arc control for fibers with poor cleave angles Loose and tight buffer with same sheath clamp Automated wind protector, sheath clamps and splice operation Graphical User Interface with 5.0" TouchscreenPC software and 90S manual downloaded from splicerMulti-function transit case with integrated workstationLithium-ion battery with 300 splices/shrinks per charge Short Description: Advanced Image Processing Technology The 90S+ possesses advanced image processing technology which analyzes the profile of the fiber image as a brightness pattern. The 90S finds the true core position and achieves the consistent lower splice loss. Description Active Fusion Control Technology:1. Active Fusion control by cleave condition:One of main causes of high splice loss is bad cleave end face. The 90S+ analyzes the condition of both L and R cleave end faces and performs optimal fusion control. This advanced technology improves splice loss significantly and reduces the risk of re-installation.2. Active Fusion control by fiber brightness:Fusion is easily affected by changes in the environment. The 90S+ uses real-time fusion parameter control by analyzing the fiber’s brightness intensity during fusion. It contributes to stable, reduced splice loss.3. Active Fusion control by fiber discrimination:Adequate splice parameters may differ depending on fiber type. The 90S+ automatically applies the optimum splice parameters depending on the fiber type.Active Blade Management Technology:1. Active Blade rotation by motor:The 90S+ and CT50 fiber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the 90S+ judges the blade is worn. The 90S+ can connect to two CT50s simultaneously.2. Active Blade life management:The 90S+ displays the remaining blade life and informs the user when a blade height change, position change, or new blade is required.Enhanced Splice Quality:The below graphs show the number of cleaves on the horizontal line with frequency of large cleave angle, bad cleave shape and no cleave at all. When the frequency of large cleave angle increases, Active Blade Management Technology can detect this increasing ratio point and rotate the blade position automatically. Active Blade Management Technology significantly reduces frequency of large cleave angles occurring but even when it does occur Active Fusion Control Technology can reduce high splice loss by precise fusion control.The 90S+ can minimize the occurrence of high splice loss and contribute to reduce the risk of re-Installation by using these 2 key technologies together.Operation Time Reduction:1. Automatic Open-Close Wind protectors:The faster automated features of the 90S+ reduce installation times. With this splicer, an operator can complete the entire splice process from splicing to heating without touching the 90S+ and only moving the fiber.2. Operation time reduction:The shape of the sheath clamp is optimized for 60mm length protection sleeves. The length from splice point to the edge of the sheath clamp is 30mm. Therefore, it is easy to center the protection sleeve over the splice by using your fingers to reference the splice point.3. Fiber retention clamp:The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out. The retention clamps release when the fiber is lifted by the operator.4. Operation time reduction:These functions enable the 90S+ to reduce operation time by 50% over the previous model.User Friendly:1. Carrying Case:There are multiple ways to utilize the 90S carrying case. The 90S+ is ready to use just by opening the case, but it is also possible to use the 90S+ on top of the carrying case or only with the work tray depending on the work environment.2. Work Tray:The work tray has many functions. There are two drawers for storage which are large enough to store tools or battery packs. Also, the work tray can be divided in two, so it is configurable to fit your work space.3. Loose tube Compatibility:The sheath clamp of the 90S+ is compatible with loose tube fiber. The Protrusion part on of the sheath clamp for loose tube fiber engages or retracts by simply changing the switch position with your finger.4. Tool-less Electrodes and illumination:The 90S+ electrodes come as an “assy” including the fixing screw. You can rotate the screw by hand without tools, enabling easy electrode replacement.The transparent electrode covers support wider illumination of the v-groove. As the sheath clamp opens on the opposite side of the illumination lamp, the sheath clamp area is illuminated without shadow. Payment We accept credit/debit card as well as PayPal. Shipping We use DHL/UPS/FedEx/TNT expedited shipping program. We dispatched item within two working days. Returns If you received wrong, damage item Please do not hesitate to contact us, We will always happy to help you with any issue we respond within one business day. Our 30 days free return with no question asking. But Please note that All returned items must be in original condition and in original packaging. About Us DubaiMachines.com is a venture by "Athar Business Machines FZE". We are a vibrant organization Incorporated and physically situated in one of the best cities in world by the name of Dubai. We are a leading retailer of Office Equipment, Niche Technology Products and Musical Instruments. Our Top Products © DubaiMachines 2022. All rights reserved.

Price: 6500 USD

Location: Dubai

End Time: 2024-02-27T13:58:31.000Z

Shipping Cost: 149 USD