Description: 3000W Hybrid Solar Inverter AC 110V DC 24V 50HZ/60HZ Pure Sine Wave Inverter 100A MPPT Charge Controller Overview: The is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. Thanks to DSP control and advanced controlal gorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging;and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time. Features: 1. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave. 2. Two output modes: mains bypass and inverter output; uninterrupted power supply 3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging 4. Advanced MPPT technology with an efficiency of 90%+. 5. Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status. 6. ON/OFF rocker switch for AC output control. 7. Power saving mode available to reduce no load loss 8. Intelligent variable speed fan to efficiently dissipate heat and extend system life. 9. Lithium battery activation by PV solar or mains, allowing access of lead acid battery and lithium battery 10. 360 all round protection with a number of protection functions. 11. Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc. Basic System Architecture: The figure below shows the system application scenario of this product. A complete system consists of the following parts: 1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load. 2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module. 3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected. 4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners. 5. All-in-one solar charge inverter: The energy conversion unit of the whole system. Specific system wiring method depends on the actual application scenario. ISolar MLV 3KW-UAC modeRated input voltage110/120VACInput voltage range(90Vac-140Vac)±2%Frequency50Hz/ 60Hz (Auto detection)Frequency Range47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);Overload/short circuit protectionCircuit breakerEfficiency>95%Conversion time (bypass and inverter)10ms (typical)AC reverse protectionAvailableMaximum bypass overload current40AInverter modeOutput voltage waveformPure sine waveRated output power (VA)3000WRated output power (W)3000WPower factor1Rated output voltage (Vac)120VACOutput voltage error±5%Output frequency range (Hz)50Hz ± 0.3Hz/60Hz ± 0.3HzEfficiency>92%Overload protection 102% < load <110%) ±10%: report error and turn off the output after 5 minutes;(110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds; Load >125% ±10%: report error and turn offthe output after 5 seconds;Peak power4500VALoaded motor capability2HPOutput short circuit protectionCircuit breakerBypass breaker specifications40ARated battery input voltage24V (Minimum starting voltage 22V)Battery voltage range20.0Vdc~33Vdc ± 0.6Vdc (Undervoltage alarm/shutdown voltage/overvoltage alarm overvoltage recovery... settable on LCD screen)Power saving modeLoad ≤25WAC chargingBattery typeLead acid or lithium batteryMaximum charge current60ACharge current error± 5AdcCharge voltage range18.0Vdc~33VdcShort circuit protectionCircuit breaker and blown fuseCircuit breaker specifications40AOvercharge protectionAlarm and turn off charging after 1 minutePV chargingMaximum PV open circuit voltage100VDCPV operating voltage range30-100VDCMPPT voltage range30-95VDCBattery voltage range18-33VDCMaximum output power1600WPV charging current range (can be set)0-60ACharging short circuit protectionBlown fuseWiring protectionReverse polarity protectionCertified specificationsCertificationCE(IEC/EN62109-1,-2),ROHS2.0EMC certification levelEN61000Operating temperature range-15°C to 55°CStorage temperature range-25°C ~ 60°CHumidity range5% to 95% (Conformal coating protection)Noise≤60dBHeat dissipationForced air cooling, variable speed of fanCommunication interfaceUSB/RS485(WiFi/GPRS)/Dry node controlSize (L*W*D)378mm*280mm*103mmWeight (kg)6.2
Price: 389.99 USD
Location: Chino, California
End Time: 2024-08-27T05:27:24.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Current Output: 40-60A
System Configuration: Off-Grid
Maximum Input Power: 1400W
Power Source: Solar
Maximum Input Voltage: 90-140V
Wattage: 3000W
Current Rating: 60-80A
MPN: ISolar-MLV
Brand: Powland
Current Type: AC/DC
Type: Charger/Inverter
Voltage: 120V
Model: ISolar-MLV
Features: Indicator Light, LCD Display
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof
Application: Agriculture/Farming, Electronics, Home/Garden, Irrigation, Recreational Vehicle (RV)
Power: 3000W/5000W