Dually / Single Fender Wheel Well w/ Mud Flaps For Traxxas TRX-6 Flatbed Hauler

Description: AJCMods 3D Printed Functional Fender Wheel Well Kit for the new Traxxas TRX6 Flatbed HaulerAvailable for dually trucks or stock trucks! Dually Kit These huge fenders improve the looks of your hauler and help keep mud, dirt, and debris from building up on the underside! These really tie everything together if you are using our dually kit and/or the bed expansion kit. Each version has built in receivers for (3) Traxxas Rock Lights on either side, and include the caps to seal them up if you won't be using rock lights. They come with rubberized mud flaps for additional scale appearance and function. Instructions:First you will press-fit the nut:Now join the two halves (left halves, right halves) together using (2) M3x20 screws on either side as shown below: Now you are ready to install each side. First remove the wheels, then remove the (4) bolts on each side that hold the shock towers in place. You will notice two sets of mounting holes on the fenders, one set is for when you are using our 1" lift kit, the other set is for a stock truck. Choose the appropriate hole for your setup and install our (4) provided M3x20 screws on either side where you just removed the shock tower screws. Once installed, refer back to step one for locating the bed screw that must be removed and replaced with the provided long M3 button head screw. This long screw should make contact with the press-fit nut and draw the fenders up to the bed to keep them held in a horizontal position. Check Our other Traxxas TRX-6 Flatbed Upgrades Here!

Price: 59 USD

Location: Acworth, Georgia

End Time: 2024-08-19T23:30:12.000Z

Shipping Cost: 0 USD