Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 w/ T-102-2000

Description: Product Description The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 with T-102-2000 Probe is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The ZX-3 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The ZX-3 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditionsProduct FeaturesIncludes NIST Traceable Calibration CertificateResolution of 0.001 inch (0.01 mm)Switch-selected units for inches or mmUser-selected Manual or Auto Zero of TransducerUser can select from 8 preset materials as well as program 2 custom material velocitiesCalibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocityScan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayedAdjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applicationsSpecial-purpose probes are offered for a variety of applications (1 to 10 MHz)The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditionsFor underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is availableHigh visibility LCD Display is readable in all lighting conditions and temps as low as 22 F (-30 C)LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and unitsOperates on two (2) AA Batteries - 45 hours continuous operationSelectable Backlight ON/OFF/AUTO5 Year Warranty, CE-Certified and Made in USA Product SpecificationsTotal Measuring Range (Steel)0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type)Measuring Range (Steel)0.040-8.000 inches 1.00-199.9 mm (with standard transducer T-102-2000)Resolution0.001 inch (0.01 mm)Measuring ModePulse-Echo (P-E)Velocity Range0.0120 to .7300 in/?s. 305 to 18,542 meters/secGAIN AdjustmentAdjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dBProbe (Standard)1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300Probes (optional)1 to 10 MHz, 3/16" up to 1 inch (custom probes available)Probe WearfacePEEK (Polyethylethylkytone)Cable1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectorsLCD DisplayMulti-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modesDisplay BacklightBacklight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) optionsDisplay Update Rate10 Hz (10 updates/sec)Temp. LimitsAmbientBattery Type2x AA batteries (rechargeable batteries can be used)Battery Life45 hours continuous useWeight308 grams (11 ounces)Dimensions63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")AccessoriesProbe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.HousingExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed)Housing RatingIP65CertificationsNIST Traceable and MIL-STD-45662AKeypadSealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keysPulse Repetition Frequency (PRF)200 Hz (200 pulses/sec)To Lock SettingsWith gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the DisplayTo unLock SettingsWith gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn offWarrantyGaugeKit Contents Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 With T-102-2000 Probe4 oz. bottle of coupling fluid2 AA batteriesNIST Traceable Calibration CertificateInstruction ManualCarrying Case

Price: 1675 USD

Location: Tomball, Texas

End Time: 2024-02-15T02:11:43.000Z

Shipping Cost: 0 USD