800W CNC Spindle Motor Kit (ER11) - 20000 RPM, 0.79NM, 110V/220V Controls

Description: 【Supports Reverse Rotation】As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque：0.79NM; Diameter: 52mm.【Speed Controller】 Power :800W; Input Voltage: AC100-AC220V±10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.【Advantages】This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.【Features】With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.【Note】This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time! Product Description RATTMMOTOR CNC Spindle Kit 800W: 1 x 800W 110V Air-Cooled Spindle Motor ER111 x 110V or 220V Speed Governor with MACH31 x 52mm Mount Bracket with Screws2 x Carbon Brush1 Set Drill bits CNC Router Bits Mirror knife sharpening: sharp and clean, smooth excretion, durable.High hardness: more wear-resistant than traditional sharp knives, can machine soft metals. Carbon Brush: With External Carbon Brush, it's simple and convenient to install. Air Cooled Spindle Motor: Power: 800WVoltage: 110VRotation speed: 5000-20000r/minTorque: 0.79NMInsulation resistance:>2MegohmDielectric strength: 500VRepeat accuracy: 0.01-0.02mmDiameter: 52mmTotal length: 203.5mmAxis collet Length: 45mm Speed Controller Governo: Input: AC220V/110V ± 10% 50/60Hz (default)Power: 800WOutput voltage: 0-110V DCCurrent: 6Awith mach3 functionDimensions: 5.51 inches x 4.33 inches x 2.05 inches Spindle Motor Mount: Applicable to:300w 400w 500w spindle motor Diameter: 52mm Material: Cast aluminumCast aluminium clamp is much heavier than aluminium profile clamp.This product has hardness, strong impact resistance, high hardness and strong antioxidant activity. Carbon Brush Port Equipped with 2 carbon brushes, fully functional and easy to install. Air Cooling Methods This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time. ER11 Extension Rods and Collet The motor is equipped with ER11 extension rod and collet, which supports engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.Can also be replaced with ER16 extension rods and collets if needed. <1> The function of the line is equivalent to a switch, and the output voltage cannot be output when it is disconnected.<2> As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface. Note: This power regulator supports both 110V and 220V, If users need 110V, please just adjust the power supply to 110V.

Price: 150.98 USD

Location: Houston, Texas

End Time: 2024-12-22T20:17:38.000Z

Shipping Cost: 0 USD