7.5 460 Ford Saginaw Power Steering A/C Bracket 1990- 1997 Bronco F250 F350

Description: It is the buyer's responsibility to review the photos and verify this part is appropriate for their vehicle prior to purchase. FITS SAGINAW STEERING PUMP ONLY Bracket, bolts, pulley, and cap for Saginaw Power Steering Bracket and Pulley from a 7.5 Big Block Ford Econoline E-Series Van. This bracket is the least produced of the Ford Saginaw brackets. Very hard to find. Can be used to replace factory Ford Econoline parts or to adapt a quieter, stronger Saginaw pump to work on serpentine belt equipped 1988-1996 Ford Broncos, F150s, F250s, and F350s with a 7.5 460 V8 pushrod gas engine. This bracket uses the 10mm head A/C compressor bolts - please make sure that is what your vehicle uses. This listing is for the large aluminum bracket, small steel stabilizer bracket (pump to exhaust manifold) compressor bolts, bracket bolts, correct pulley, pump cap and pump pressure hose fitting - the exact parts you see in the pictures. These parts are in good used condition. Steering pump pressure fitting included for use if you are adapting this to an F-Series. F0UA-19E708-EB A/C compressor and Saginaw power steering pump bracket made of cast aluminum alloy. The A/C mounting point is the type that uses 10mm head attaching bolts. Be advised some earlier Ford A/C compressors use 13mm head A/C bolts. The bracket is designed to use the Saginaw designed power steering pump - it will not support any other type of pump. I see no cracks, damage or damaged threads on this used bracket. This is a top quality used part. Bolts – Most if not all factory fasteners are included. Stamped steel support bracket painted black – this attached to the driver side exhaust manifold and to the rear of the Saginaw pump. Bracket is intact - exhaust stud remnant was already broken when I found it. Power steering pulley - E7UA steel serpentine pulley in good shape. Power steering pressure hose – the pump segment of the hose is included so you can adapt is to your vehicle.No steering pump supplied. You'll want to order a rebuilt Saginaw pump to fit a 1996 Ford E-350 with 7.5. A pump core charge is typically only $17 or so at that rock place. Normal 0 false false false EN-US X-NONE X-NONE Exact parts that the purchaser will receive are shown in these photos. Please research fitment with your application. Free FedEx Ground shipping to Continental US! It is the buyer's responsibility to review the photos and verify this part is appropriate for their vehicle prior to purchase. I ship via FedEx Ground or Fed Ex Home Delivery. I do not ship via FedEx "SmartPost". Please note: You are purchasing used parts from an eBay seller with more than 20 years on eBay and decades of used car part experience. I have done my best to give you an accurate description of the part you are buying. I only offer parts I would use on my own projects - the junk stays in the junkyard. If you have any questions feel free to contact me. Be advised I am eager to get your item shipped quickly, but I am often away from home Friday, Saturday and Sunday.

Price: 534.34 USD

Location: Houston, Texas

End Time: 2025-01-16T20:02:35.000Z

Shipping Cost: 0 USD